Wednesday was our first chance to see all the cars together with nowhere to hide their latest design developments and secrets ahead of the new season.
Red Bull Racing RB20 detail
Photo by: Giorgio Piola
Red Bull has not only changed the sidepod inlet arrangement on the RB20 but also completely overhauled the internal makeup of the car too, as the sidepod contains two radiators in a V-shaped configuration that are cantered away from the floor.
This means the larger saddle-style cooler arrangement above the power unit has been abandoned, albeit with a smaller cooler housed here instead. This shot of the car without bodywork suggests that the inlets beside the halo feed airflow to the ductwork on the outer face of the engine cover’s shoulder.
Red Bull Racing RB20 detail
Photo by: Motorsport Images
Here’s a shot showing the inlets beside the halo that take in some of the airflow in that region and ducts it rearwards to the outlets on the side of the engine cover.
Mercedes F1 W15 detail
Photo by: Giorgio Piola
Let’s look under the covers of the Mercedes W15, which has a very different arrangement having fully abandoned the zeropod solution this year. Aside from the position of the upper side impact spar (SIS) and radiators it’s interesting to see the internal supports used to prevent the floor from flexing too much.
Haas VF-24 detail
Photo by: Giorgio Piola
Haas F1 Team has opted for something a little different in regard to the front wing diveplane this season, with a double kick or wave-like appearance along its length.
Haas VF-24 detail
Photo by: Giorgio Piola
Haas has also joined a number of teams utilising semi-detached flaps, whereby the flaps don’t connect to the endplate and each have their own shedding surface, while a small connecting strip is used for legality purposes. It has also added another winglet that’s attached to the vertical section of the last flap to help create even more outwash.
Also note the camera mounted on the inside of the endplate is mounted on its own winglet as high as possible in the front corner.
Haas VF-24 detail
Photo by: Giorgio Piola
Top-down overview of the outer portion of the front wing on the VF-24, which gives us a great view of how the flap tips are turned outward to help generate outwash.
Mercedes W15 nose and front wing detail
Photo by: Uncredited
The much talked about upper flap arrangement on the Mercedes front wing, which features a very slender element in the non-moveable region in order to fulfil regulatory criteria and allow for the larger chord element outboard of it.
Underfloor of the Williams FW46
Photo by: Simon Galloway / Motorsport Images
A great view of the Williams FW46’s underfloor and diffuser as it’s craned away from the circuit. Note the revetting in the vertical transition as it works rearward towards the boat tail section.
Aston Martin AMR24 detail
Photo by: Giorgio Piola
A close up of the Aston Martin AMR24 and the pull-rod rear suspension layout it is using this season. Also note that the winglet under the crash structure that the team introduced last season seems to have reappeared, albeit in a slightly different form.
Aston Martin AMR24 detail
Photo by: Giorgio Piola
A shot of the rear portion of the sidepod on the Aston Martin AMR24 shows how sculpted the flank is, while we’re also able to see how the twisted edge wing is connected to the underside of the floor.
Alpine A524
Photo by: Giorgio Piola
A close up of the P-shaped sidepod inlet on the Alpine A524 this season, which you’ll note has a lower leading edge which is twisted downward to help with flow into the inlet and the undercut.
Oscar Piastri, McLaren MCL38
Photo by: Giorgio Piola
A closer look at the smaller rounder inlet used on the MCL38, with the remainder of the sidepods width providing the space for the intake winglet ahead and above of the inlet that has a variable camber across its span.
Mercedes F1 W15
Photo by: Giorgio Piola
The elongated downwash ramp-style sidepod bodywork on the Mercedes W15, with an elongated midline cut out, while a twisted edge wing – similar to the one used during the backend of 2023 – is also in use.
Max Verstappen, Red Bull Racing RB20
Photo by: Giorgio Piola
The Red Bull RB20 is outfitted with two snorkel-like driver cooling inlets on the chassis, rather than in the nose tip, owing to the new regulations for 2024 that allow them to be placed in either or both positions.
Mercedes F1 W15 front detail
Photo by: Giorgio Piola
The Mercedes undergoes some changes in the garage which gives us a nice view of some of the inboard suspension elements, including the heave damper.
Alex Albon, Williams FW46
Photo by: Zak Mauger / Motorsport Images
The Williams FW46’s front wing, nose and suspension doused with flow-vis paint in order that the team can get visual confirmation that the aerodynamic surfaces are performing as was anticipated from their CFD and wind tunnel studies.
Ferrari SF-24
Photo by: Giorgio Piola
A Kiel probe rake fitted to the side of the engine cover on the Ferrari SF-24 to gather airflow data in that region, with the team likely interested in correlation data in regards to the new layout around the halo.
Ferrari SF-24
Photo by: Giorgio Piola
Aero rakes with a small army of Kiel probes attached were also fitted behind the front wheel assemblies on the Ferrari SF-24 during the first few runs of the morning session.
Haas VF-24
Photo by: Giorgio Piola
A close up of the sidepod inlet on the Haas VF-24 which features more of an underbite this season.
Haas VF-24
Photo by: Giorgio Piola
Haas has clearly been inspired by Red Bull when it comes to the floor edge and edge wing design this season too, with the segmented forward section, upwardly scrolled edge, control strakes and twisted rear section all design features seen on the RB19 last season.
Esteban Ocon, Alpine A524
Photo by: Zak Mauger / Motorsport Images
The sidepod of the Alpine A524 is doused with blue flow-viz paint as the team look for signs that the region is performing as anticipated.
Mercedes W15 detail
Photo by: Uncredited
This angle of the front brake duct shows how the end fence sits away from the drum and the inlet straddles the gap, allowing airflow to be taken in outside of the fence and between it and the tyre’s sidewall.
Ferrari SF-24 detail
Photo by: Uncredited
As the Ferrari mechanics make some adjustments to the SF-24 we’re given a relatively unobstructed view of some of the inboard suspension elements.
Ferrari SF-24 detail
Photo by: Uncredited
Ferrari uses a more organic rake arrangement for collecting data in conjunction with the attached Kiel probes than some of the more traditional ladder-style rakes you might see elsewhere.
McLaren MCL38 detail
Photo by: Uncredited
A close up of the scrolled front portion of the edge wing with strakes included to help manoeuvre the airflow outboard, while the edge wing then twists along its length and is married to a similar geometry on the floor edge.
Kick Sauber C44
Photo by: Uncredited
A rear view of the Sauber C44, including the rear wing, beam wing, brake duct winglets and the diffuser.
VCARB 01 detail
Photo by: Uncredited
A large Kiel probe array was fitted behind the rear wheel of the RB01 as the team looked to gather some data, with some notable changes already made to the sidepod’s bodywork geometry compared with what they showed in the renders.
Alpine A524 detail
Photo by: Uncredited
The Alpine A524’s rear end layout is fairly similar to last year, with the team opting to use its bi-plane beam wing arrangement today. Also note the rear brake duct winglets have been trimmed much shorter than the regulations permit.
McLaren MCL38 detail
Photo by: Uncredited
The McLaren MCL38 with Kiel probe rakes mounted across the rear section of the car, ahead of the rear wheels and also inside the diffuser, as the team looks to capture real world data that can be used to correlate with the CFD and wind tunnel data they’ve already seen.
Red Bull Racing RB20 detail
Photo by: Uncredited
A rearward shot of the RB20 noting how the gullies in the engine cover taper outwards when terminating at the cooling outlet, while there’s also outlets beside the cover (around the Honda logo). There’s also a considerable amount of contouring in the underfloor and diffuser’s surfaces.
Charles Leclerc, Ferrari SF-24
Photo by: Uncredited
A look at the Ferrari SF-24 from the front, with the handlebar-style mountings for the airbox camera housings now more visible given there’s no longer winglets surrounding them. It has mounted cameras inside the sidepod inlet which appear to be looking at the front tyre and are likely capturing infra-red footage.
McLaren MCL38 detail
Photo by: Uncredited
The McLaren MCL38 returns from a run whereby flow-vis paint has been daubed over the rear wing and beam wing.
VCARB 01 detail
Photo by: Uncredited
A close up of the RB01’s rear wing, which features a semi-detached tip section in a similar vein to its predecessor.
Alex Albon, Williams FW46
Photo by: Uncredited
The rear wing and beam wing of the Williams FW46 is covered in flow-vis paint as the team looks for visual confirmation that the assembly is performing as expected, aerodynamically speaking.
Alpine A524 detail
Photo by: Uncredited
A look at how large the cooling panel could be on the Alpine A524, with only a few louvres employed in this variant at the rear of the panel.
Mercedes W15 detail
Photo by: Uncredited
An overview of the Mercedes steering wheel with its various rotaries, switches and buttons that control the power unit and chassis. Also note the cooling inlet housed in the vanity panel, which is possible owing to the new regulations this season, whereas before it could only be located in the nose tip.
Max Verstappen, Red Bull Racing RB20
Photo by: Simon Galloway / Motorsport Images
The Red Bull RB20 with flow-vis paint applied to the rear wing and beam wing.
Olivia Martin is a dedicated sports journalist based in the UK. With a passion for various athletic disciplines, she covers everything from major league championships to local sports events, delivering up-to-the-minute updates and in-depth analysis.
